Safety Information

Control solution testing
Performing a control test
① Insert a test strip to turn the meter on
② System check screen
③ The blood drop symbol flashes on the display screen.
Your meter is now ready to apply blood sample.
④ Shake the control solution vial before each test.
Remove the cap and squeeze the vial to discard the first
drop. Then wipe the tip with a clean tissue or cloth. Hold
the vial upside down and gently squeeze a hanging drop.
29
AVG
OK
mg/dL mmol/L
MEM
M
D
AM
PM
The backlight will be lit every time the meter is turned
on. The screen will briefly display all content to
confirm that the display is working properly.