Specifications

Setting up your meterSetting up your meter
c.Optical check
Note:if the optical system is abnormal,please check the
quality control strips for contamination,bending or
damage.If the above phenomenon if found,please check
again with a new quality controlstrip.If there are still
problem in the reinspection,please contact the local
dealer or manufacturer
with the meter turned off, press and hold for 2 seconds to enter
Meter Setup mode. Press until PC is display.Press to
enter optical check mode,insert the quality control strips,and then
press to start the optical system inspection. If “YES”is displayed,
the Meter is normal;If “NO”is displayed,the Meter is abnormal.
or
Setting up your meter
12
16