User's Guide

On the right side, from front to back is the lanyard attachment point. Behind that is the small,
round Power On button followed by the small, round Power Off button. Braille letters, on, are
above the Power On button and braille letters, off, are above the Power Off button.
Next is the USB-C port, used to connect the eReader to a computer or the AC adapter. The last
port on the right side is the USB-A port, used to connect an NLS cartridge with the provided cable,
or a USB flash drive to the eReader. Braille letters, usb, are centered above these two ports with
the braille letter, c, above the USB-C port and the braille letter, a, above the USB-A port.
1.5 Back Edge
The back edge has no keys or buttons.
1.6 Bottom
On the bottom of the device are four rubber feet, one in each corner; and a sticker with print
information about the device.
2 Getting Started
2.1 Unpacking
The package contains the following items:
• eReader 20-cell braille display
• USB-A to NLS cartridge cable
• AC adapter with USB-A to USB-C cable
• Braille Getting Started Guide
• Print Getting Started Guide
• Braille User Guide
• Lanyard
2.2 Charging the Battery
Prior to using your eReader, make sure it is charged completely. The charging cable is the
longer cable included with the eReader. To charge the battery, connect the smaller end of the
charging cable (the USB-C connector) into the USB-C port located on the right side of the
eReader, just behind the power buttons. It doesn't matter which direction the cable is oriented
when you plug it in. This port will accept it either way.