User's Guide

NLS magazines have special article separators and your eReader is aware of these so you can
use them for navigation. You can move forward or back by article by using the following keys:
• > with dots 7 (dots 3-4-5-7) go back by article
• > with dot 8 (3-4-5-8) go forward by article
To go to a specific article number, use the > (dots 3-4-5 or d3-d4-d5) command. The current
article number will be shown. Type in the desired article number.
3.2.3 Autoscroll
The eReader's autoscroll feature allows you to read a book without having to continuously
press keys. The braille display will advance automatically at a rate that you control. To turn on
this feature, press / (dots 3-4) when inside a book. Press / again to stop autoscroll and return to
manual panning.
You can change the autoscroll speed while autoscrolling inside a book. To slow down the
autoscroll speed, press / with dot 7 (dots 3-4-7). To make autoscroll go faster, press / with dot 8
(dots 3-4-8). Each increase or decrease of autoscroll speed changes the rate by one-quarter of a
second per line. The unit will remember your last setting. When you begin autoscrolling again, it
will start at the last speed you used.
3.2.4 Get Current Position
You can use the Where am I command whenever you want to know your current position
within a book. To activate the Where am I command, press the braille wh-sign (dots 1-5-6).
The display will show the current volume number, page number, line number from top of page,
and character number from left margin. The Where am I? display will look something like this:
v3 p34 l22 c0
3.2.5 Go to the Beginning or End of a Book
You can easily go to the beginning or end of a book using keyboard commands. To go to the
beginning of a book, press Space with dots 1-2-3. To go to the end of a book, press Space with
dots 4-5-6.