Specifications

TABLE 17 BLE SUBSYSTEM ELECTRICAL SPECIFICATIONS
FTX、INITDR Initial frequency drift -20 - 20 kHz RF-PHY
Specification
(TRM-
LE/CA/06/C)
FTX, DR Maximum drift rate -20 - 20 kHz/
50µs
RF-PHY
Specification
(TRM-
LE/CA/06/C)
IBSE1 In-band spurious
emission at 2-MHz
offset
- - -20 dBm RF-PHY
Specification
(TRM-
LE/CA/03/C)
IBSE2 In-band spurious
emission at ≥3-MHz
offset
- - ±3 dBm RF-PHY
Specification
(TRM-
LE/CA/03/C)
TXSE1 Transmitter spurious
emissions (average),
<1.0 GHz
- - -55.5 dBm FCC-15.247
TXSE2 Transmitter spurious
emissions (average),
<1.0 GHz
- - -41.5 dBm FCC-15.247
RF Current Specifications
IRX Receive current in
normal mode
- 18.7 - mA -
IRX_RF Radio receive current
in normal mode
- 16.4 - mA Measured at
V
DDR
IRX、
HIGHGAIN
Receive current in
high-gain mode
- 21.5 - mA -
ITX, 3dBm TX current at 3-dBm
setting (PA10)
- 20 - mA -
ITX, 0dBm TX current at 0-dBm
setting (PA7)
- 16.5 - mA -
ITX_RF,
0dBm
Radio TX current at 0
dBm setting (PA7)
- 15.6 - mA Measured at
V
DDR
ITX_RF,
0dBm
Radio TX current at 0
dBm excluding Balun
loss
- 14.2 - mA Guaranteed by
design
simulation
ITX,-3dBm TX current at –3-dBm
setting (PA4)
- 15.5 - mA -
17 of 18