User's Manual

Thermal Presence Detector User Manual
1
Chapter 1 Overview
1.1 Introduction
Thermal Presence Detector is a detector based on thermal imaging technology.
Due to the advantages of thermal imaging, the detector is able to achieve the detection tasks
without the influence of changing light condition.
The device supports network connection by web browser on a mobile phone or on a computer
with POE function. Data transmission, live view and device configuration are available with web
browser and mobile application.
The detector can be used for people number detection, people existence detection, and abnormal
temperature monitoring in meeting rooms, libraries, etc.
Table 1-1 Function and Settings
Function Descriptions Main Settings
People Number Detection and
People Existence Detection
Detector detects the people
number in a region. When
abnormal number is detected,
the device triggers alarms.
The people existence status is
able to be uploaded
continuously when the people
existence detection is
enabled.
The function is ideal to use in
the situation where people
number should be restricted
to a certain quantity.
Enable Number of People
Exception Detection, People
Existence Detection and
complete related settings. See
People Number Management
for instructions.
Voice warning is supported
when you select Audible
Warning as the alarm linkage
of detected exceptions and
complete the related settings.
See People Number
Management and Set Audible
Alarm Output for instructions.
The device also supports
outputting alarm signals to a
connected peripheral device.
See Quick Start Guide of the
detector for alarm cable
connection, and see Trigger
Alarm Output for device
settings.
Temperature Measurement
and Abnormal Temperature
Detect the temperatures in
the detection scene. When
Enable Temperature
Measurement and complete