User's Manual

Thermal Image Scope User Manual

8.3 Prerecord Video

After enabling this function, the device can automatically record the 7 seconds before and after

the recoil-activation.

Steps

1. In the main live view, hold the wheel to show the menu.

2. Rotate the wheel to select .

3. Press the wheel to switch the on/off mode this function.

4. Hold the wheel to save and exit.

Note

If you activate recoils continuously, the device will record the 7 seconds before the first recoil

until the 7 seconds after the last recoil.

What to do next

For exporting recording files, refer to Export Files.

8.4 Export Files

This function is used to export recorded videos and captured pictures.

Before You Start

● Turn off hotspot function.

● Turn on the device after connecting it to your PC, and keep the device on for 10 to 15 seconds

before other operations.

Steps

1. Connect the device and PC with a Type-C cable.

Note

Make sure the device is turned on when connecting the cable.

2. Open computer disk and select the disk of device. Go to the DCIM folder and find the folder

named after the capture year and month. For example, if you capture a picture or record a

video in June 2022, go to DCIM → 202206 to find the picture or video.

3. Select and copy the files to PC.

4. Disconnect the device from your PC.

Note

● The device displays images when you connect it to PC, but functions such as recording,

capturing and hotspot are disabled.

● When you connect the device to PC for the first time, it installs the drive program