User's Manual

Thermal Image Scope User Manual
11
Figure 3-6 Set Picture in Picture Mode
Note
● When reticle is enabled, the PIP view is the detail of reticle. When reticle is not enabled, the
PIP view is the detail of central part.
● If digital zoom is enabled, the PIP view also zooms. If the digital zoom ratio exceeds 4, the PIP
does not zoom.
3.10 Adjust Digital Zoom
In the live view interface, rotate the wheel to switch the digital zoom of the device. The value of
digital zoom can be set to 1×, 2×, 4×, and 8×.
3.11 Set OSD
You can choose whether to display the OSD information on the live view interface in this function.
Steps
1. Hold the wheel to show the menu.
2. Rotate the wheel to select , and press the wheel to enter the OSD setting interface.
3. Rotate the wheel to select the OSD information you want to display or not.
4. Press the wheel to enable or disable the selected OSD information.
3.11.1 Synchronize Time
Steps
1. Hold the wheel to show the menu.
2. Rotate the wheel to select , and press the wheel to enter the time setting interface.