User's Manual

Thermal Image Scope User Manual
10
Figure 3-5 Mirror Effect
3.8 Flat Field Correction
This function can correct non-uniformity of display.
Steps
1. Hold the wheel to enter the menu.
2. Rotate the wheel to select , and press the wheel to switch the FFC mode.
– Manual FFC: Rotate the wheel to select , and press the wheel to correct the non-
uniformity of display.
– Auto FFC: The device performs FFC automatically according to the set schedule when
switching on the camera.
– External: Cover the lens cover, rotate the wheel to select , and the press the wheel to
correct the non-uniformity of display.
3. Hold the wheel to exit.
3.9 Set Picture in Picture Mode
In the view mode, hold the to enable and exit PIP. The PIP image is displayed at the up-center
of the live view.