User's Manual

Thermal Image Scope User Manual

3.7 Correct Defective Pixel

The device can correct the defective pixels on the screen.

Steps

1. Hold the wheel to show the menu.

2. Rotate the wheel to select , and press the wheel to enter the DPC setting interface.

3. In the DPC Interface, rotate the wheel to select Axis, and press the wheel to switch the moving

direction of the cursor.

4. Rotate the wheel to move the cursor until it reaches the defective pixel, and press the wheel to

confirm.

5. Rotate the wheel to select DPC, and press the wheel to correct the defective pixel.

Note

● The selected defective pixel can be magnified and displayed at the bottom right of the

interface.

Figure 3-4 Correct Defective Pixel

● In the DPC interface, rotate the wheel to select Mirror, and then the menu at the bottom of

the interface can be mirrored to the top of the interface.