Quick Start Guide

3. Install Camera (Page 2 – B)

Before installation, make sure that the installation surface is strong

enough to withstand four times the weight of the device and the

accessory. Check the specification of the products for the installation

environment.

Select a desired installation method from B.1 to B.4.

Installation Method and Steps

Method

Steps

B.1

1. Attach the device to a ferromagnetic surface.

B.2

1. Paste the drill template to the installation surface.

2. Drill 4 screw holes (Ø3 mm) according to the “2” holes.

3. Screw the device to the surface with 4 supplied M3×10.

B.3

1. Paste the drill template to the installation surface.

2. Drill 4 screw holes (Ø3.5 mm) according to the “1” holes.

3. Screw the device to the surface with supplied M3×15 screws

and M3 nuts.

B.4

Purchase a PT joint in advance.

1. Disamble the PT joint.

2. Install the PT joint base to installation surface, and then

install the PT joint bracket back.

3. Fix the device to the PT joint bracket.

4. User Manual

Legal Information

Software Co., Ltd. All rights

reserved.

About this Manual

The Manual includes instructions for

using and managing the Product.

Pictures, charts, images and all

other information hereinafter are

for description and explanation only.

The information contained in the

Manual is subject to change,

without notice, due to firmware

updates or other reasons. Please

find the latest version of this

Manual at the HIKMICRO website

(www.hikmicrotech.com/).

Please use this Manual with the

guidance and assistance of

professionals trained in supporting

the Product.