Specifications

10
6.2 Production Guide
• For in-line modules manufactured by JFTECH, it is recommended to give priority to wave
soldering equipment for welding.Manual welding is only used when wave soldering
equipment cannot be used for welding.After unpacking, it is recommended to complete the
welding of the module within 24 hours, otherwise it needs to be placed in a drying cabinet
with a humidity of not more than 10% RH, or re-vacuum packed and record the exposure
time, the total exposure time does not exceed 168 hours.
• Equipment and materials required for welding ：
• Wave soldering equipment
• Wave soldering fixture
• Thermostatic soldering iron
• Tin bar, tin wire, flux
• Furnace temperature tester
• Equipment required for baking ：