Product Info

QR code
 Positioning QR code deployment requirements
1.The ceiling is parallel to the ground and does not reflect light
2.The ceiling shall be flat, and it is better to apply paint or emulsion paint,
or have flat metal surface, and do not support materials with insufficient
viscosity
3.There should be no big obstructions above the robot's road, so that
the machine can't see the QR code on the road
4.Ceiling to camera height between 1m and 5m
5.The QR code should be pasted in the middle of the road as much as
possible, not close to the obstacles
6.The two-dimensional code shall be pasted smoothly, and the circular
spot position of the two-dimensional code label shall not be inconsistent
with the original position due to too many wrinkles
7.The pasting distance of the QR code is 5-10 meters, and the corner and
intersection should be pasted
QR code paste
method
Pasting method: as shown in Figure 2, first tear off the white paper of the
QR code label, paste the transparent surface onto the ceiling, and then
tear the transparent surface, taking care not to drop the round or ring
spots during the tearing process, after completion As shown in Figure 3.
Where to place the QR code label