Product Info

Network Settings
Note: The router network segment cannot be the 192.168.10.x network
segment
1.Open the [Settings]-[WLAN] on the Android screen of the robot to
connect to Wi-Fi
2.Open the Ftp application and enter the following interface. Follow the
steps shown in the figure. If the Wi-Fi password already exists, click
"Send Wi-Fi Information to Connect to ROS".
① Check the Wi-Fi name you want to connect to
② Enter Wi-Fi password
③ Send Wi-Fi information to the navigation system (just click once,
don't click repeatedly)
④ Observe connect situation
⑤ Show IP for connection success (show 127.0.0.1 for connection
failure)
3.The scanning device should be connected to the same LAN as the
machine. Open the browser and input the IP address of the machine
(Chrome browser is recommended)