Quick Start Guide

About the Manual
FAQ
For more quesons, please scan the QR code below or visit:
www.imoulife.com/web/support/help
- This manual is for reference only. The operaon of the actual product
shall prevail if there is any inconsistency.
- All the designs and soware are subject to change without prior wrien
noce.
- All trademarks and registered trademarks menoned are the properes
of their respecve owners.
- Please visit our website or contact your local customer service if there is
any problem when using the device.
- If there is any uncertainty or controversy, we reserve the right of final
explanaon.
Q: The device cannot boot up or work as expected?
Check the LED indicator status. If the light is not in green, press and
hold the reset buon for 10 s to reset the camera.
Q: How to connect the camera to another Wi-Fi network?
If the camera is online, select Device Details > Network Config to
change the Wi-Fi connecon on the app.
If the camera is offline, reset the camera, and then configure the
camera again.
Q: Connecon takes too long?
Check if the distance between the camera and the router, and that
between the camera and the smart phone is both within 5 m (16.4
) during the connecon.
Check the Wi-Fi configuraon of the router: Select the channel to
auto, and the mode to 11bgn mixed.
Q: When the micro SD card is full, how is the recorded video saved?
When the micro SD card is full, the system will overwrite the previous
recorded videos. Save the important informaon in me.
Q: Where are the recorded videos saved?
If you have acvated the cloud storage and installed a micro SD card, the
recordings will be both saved to the card and cloud. If the cloud storage
is deacvated, the recordings are saved to the SD card. Videos recorded
during live view or playback is saved on your phone.
Q: The device is offline?
Check the indicator status:
Solid green: Check whether the router can connect to the Internet. If
the network is connected, restart the camera.
Flashing red: Reset the camera, and then configure the camera again.
Solid red: The camera is faulty.
Step 3 Secure the mounng bracket to the surface with included mounng
screws.
Step 4 Align on the top of the camera with on the bracket, then fit
the two parts together.
Step 5 Rotate the camera counterclockwise unl it is locked. Make sure
align with .
Step 6 Power on the camera and then adjust its angle properly.
Step 1 Peel off the rectangular mounng template and sck it to the
desired installaon area.
Step 2 Drill holes into the mounng surface as the mounng template
marks and then insert wall anchors as needed.
Step 3 Secure the mounng bracket to the surface with included mounng
screws.
Step 4 Align on the top of the camera with on the bracket, then fit
the two parts together.
Step 5 Rotate the camera counterclockwise unl it is locked. Make sure
align with .
Step 6 Power on the camera and then adjust its angle properly.
Wall Mount
Camera
Mounng Screw
Rectangular
Mounng Template
Wall Anchor
Make sure that the pole is strong enough to hold at least three mes
the weight of the camera and the bracket.
The hoops are not provided. Please prepare them in advance.
Step 2 Align on the top of the camera with on the bracket, then fit
the two parts together.
Step 3 Rotate the camera counterclockwise unl it is locked. Make sure
align with .
Step 4 Power on the camera and then adjust its angle properly.
Step 1 Thread the hoop through the mounng holes on the bracket, then
aach the bracket to the pole .
Pole Mount
Mounng Bracket
Hoop
1
2
1
2
Mounng Bracket
Mounng Surface
3
Camera
3
4
5