Quick Start Guide

Figure 3-1 QR code
Step 2 Run Imou Life App, and then register an account for the first
use.
Step 3 Connect the camera to power source with the power adapter.
Step 4 Wait for booting to be finished, and then the camera indicator
flashes with green light.
Step 5 Do the following operations to finish adding camera.
Figure 3-2 Operatons
Select Wi-Fi
Wi-Fi XXXXXX1
Wi-Fi XXXXXX3
...
Wi-Fi Password
●
If you have more than one device, do step 5 to add them
one by one.
●
If the Wi-Fi network has changed or the indicator status
goes wrong, reset the camera, and then do step 5 to add
it again.
4
Installing Camera
Make sure that the mounting surface is smooth and strong enough to
hold at least three times of the device weight.
For the installation diagram and item list of the camera, see Figure 4-1.
Figure 4-1 Installation diagram
Camera
Self-tapping Screw
Positioning Map
Expansion Bolt
Mounting Surface
Step 1 Drill screw holes on the mounting surface as the positioning
map shows, and then put in the expansion bolts.
Step 2 Attach the pedestal to the mounting surface with the self-
tapping screws.
Step 3 Power up the camera, and then adjust the lens to the ideal
angle.