Quick Start Guide
Q: The device cannot boot up or work as expected?
If the doorbell is battery-powered, check if the battery needs recharging.
If the doorbell is wire-powered, it is compatible with 8 V-24 V AC/DC. Make sure the power source is
proper. Check if the breaker is turned back on after installation is completed.
Q: The device is oine?
If the LED is ashing red, check whether the router can connect to the Internet. If the network is connected,
restart the device. If the device is still oine, reset it.
Q: How to reset the device?
Press the reset button located on the back of the device for 5 s until the LED turns solid red and then release
the button. The doorbell will not be reset but restart itself if you hold the reset button for more than 10 s.
Q: How to update the rmware?
You can update the rmware through the "Imou Life" app in Devices Settings > Firmware. It shows a red
dot when an update is available. The doorbell will restart automatically when it nishes update.
15