Quick Start Guide

x 2x 4

1 2

Mounting Bracket

Angled Bracket

Step 2 (Optional) Install Wall Anchors

If installing on stucco, brick, or concrete, use the provided drill bit to drill holes where

marked, and then insert the included wall anchors.

For wood, drywall or soft surface, skip this step.

Step 3 Secure the Bracket

Lead the doorbell wires through the hole on the bracket, and then secure the bracket to the mounting surface

with a Philips-head screwdriver and supplied mounting screws. Be sure to follow the "UP" direction on the

mounting bracket. For how to screw the bracket, please refer to the counterpart on page 6.

x 4