User's Manual

User Manual for ZJTJ-BR3-HQ03 Travel Recorder
10/21
Figure: 2-3
5. Fix the product to an appropriate location
 Embedded installation is adopted: namely use a clamping
set on the product to place the product to a fixed position
on the dashboard by embedded installation. Then fix the
product with M6 supporting firmware; check to make
sure the screws are tightened.
6. Connect power supply for the vehicle body and turn on
the vehicle switch
 Finally, connect the battery power line with the product
power line, and then turn on the vehicle switch (ACC);
7. Confirm that the product is working properly
 1-2 minutes later, the networking lamp will be constantly
on and occasionally flash, indicating that the product has
been successfully connected to the platform;
 When the display screen shows GSM signal ( ), it
means that it is in good condition. ( ) indicates that it is
connected to the platform; GNSS positioning icon ( )
indicates normal GPS positioning; ( ) indicates
current alarm information as shown in in Figure
2-5-4;