User's Manual
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Typical Application
- 4 Terminals and Interfaces of Wiring
- 5 Installation and Wiring
- 6 Before You Start
- 7 Video Intercom Device Set-up Tool
- 8 Batch Configuration Tool
- 9 Setting the Door Station via iVMS-4200
- 10 Local Operation
- Appendix
Video Intercom Door Station
ยทUser Manual
53
Figure 9-15 Group Deleting Interface
3. Click the OK button to complete the group deleting operation.
9.6 Card Management
Purpose:
You can add unauthorized cards to the community and then you can assign the cards to
the corresponding indoor station and outdoor stations. For example, if there are 3
residents living in Room 401, you can assign 3 cards to No. 401 indoor Station. For each
indoor station, you can assign many cards, and you can assign these cards to the door
station from same building.
Steps:
1. Click the Video Intercom button on the control panel to enter the video intercom
interface.
2. Press the Card Management tab to enter the card management interface.
Figure 9-16 Card Management Interface
9.6.1 Unauthorized Card Management
Adding Card
1. Click the Add Card button to pop up card adding dialog box.
2. Select card adding mode: In Batch, By Single, Card Reader.