User's Manual
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Typical Application
- 4 Terminals and Interfaces of Wiring
- 5 Installation and Wiring
- 6 Before You Start
- 7 Video Intercom Device Set-up Tool
- 8 Batch Configuration Tool
- 9 Setting the Door Station via iVMS-4200
- 10 Local Operation
- Appendix
Video Intercom Door Station
·User Manual
41
Linked Devices Network Configuration
Purpose:
On the linked devices network configuration interface, you can configure the network
parameters of master stations, SIP servers and management centers of the same LAN.
Steps:
1. Click the Linked Device Network Configuration button to enter the devices network
configuration interface.
Figure 8-35 Linked Devices Network Configuration Interface
2. Select the device type from the drop-down list.
3. Enter the IP address of the master station, SIP server address, management center IP
address, and management center port No..
4. Click the Apply button to link the master station, SIP server and management center
to the device.
After adding master station IP address, the linkage between door station and master
station can be realized.
After adding SIP server address, the video intercom of the same community can be
realized, such as the video intercom between indoor stations of different building,
calling indoor station from outer door station and video intercom between
management center and indoors.
After adding management center IP address, the events can be uploaded to the
management center.
FTP
Steps:
1. Click the FTP button to enter the FTP parameters interface.