User's Manual

Table Of Contents
Video Intercom Door Station
·User Manual
39
Figure 8-31 I/O Input and Output Interface
2. Select I/O input No., input mode, I/O output No., and output mode.
3. Click the Apply button to enable the settings.
There are 4 I/O Input Terminals, Terminal 1~4 correspond to ALARM_1~ALARM_4
interfaces of door station. You can enable/disable IO In or set IO In as door magnetic
or door switch by selecting from the dropdown list.
There is only 1 I/O Output Terminals, which corresponds to DR_NC/DR_COM/DR_NO
interface of door station. You can enable/disable IO Out or set IO Out as electric lock
by selecting from the dropdown list.
Volume Input and Output
Click the Volume Input and Output button to enter the volume input and output
interface. Slide the slider to adjust the volume input and volume output.
Figure 8-32 Volume Input and Output Interface
Calling Buttons
1. Click the Calling Buttons button to enter the calling buttons settings interface.