User's Manual

Table Of Contents
Result
The events of armed device(s) are automacally uploaded to the client when the event is
triggered.
6.10.2 View Real-Time Events
The real-me event informaon received by the client of the connected resources are displayed.
You can check the real-me event informaon, including event source, event me, priority, etc.
Before You Start
Enable receiving events from devices before the client can receive event from the device, see
Enable Receiving Events from Devices for details.
Steps
1. Click Event Center Real-me Event to enter the real-me event page and you can view the
real-me events received by the client.
Event Time
For encoding device, event me is the client me when it receives the event. For other
device types, event me is the me when the event is triggered.
Priority
Priority represents the emergency degree of the event.
2. Filter the events.
Filter by Device Type and (or)
Priority
Select device type(s) and (or) priories to lter
events.
Filter by Keywords Enter the keywords to lter the events.
3. Oponal: Righ
t-click the table header of the event list to customize the event related items to
be displayed in the event list.
4. View the event details.
1) Select an event in the event list.
2) Click Expand in the right-lower corner of the page.
3) View the detail descripon and handing records of the event.
5. Oponal: P
erform the following operaons if necessary.
Handle Single Event Click Handle
to enter the processing suggeson, and then click
Commit.
Note
Aer an event is handled, the Handle buon will become Add
Remark. Click Add Remark to add more remarks for this handled
event.
DS-K3G501 Series Tripod Turnsle User Manual
76