User's Manual

Table Of Contents
2. Select an organizaon to import the persons.
3. Click Ge
t from Device.
4. Select the access control device from the drop-down list.
5. Click Get to start imporng the person informaon to the client.
The person informaon, including person details, person's ngerprint informaon (if
congured), and the linked cards (if congured), will be imported to the selected organizaon.
6.4.18 Move Persons to Another Organizaon
You can move the added persons to another organizaon if you need.
Before You Start
Make sure you have added at least two organizaons.
Make sure you have imported person informaon.
Steps
1. Enter Person module.
2. Select an organizaon in the le panel.
The persons under the organizaon will be displayed in the right panel.
3. Select the person to move.
4. Click Change Organizaon.
5. Select the organizaon to move persons to.
6. Click OK.
6.4.19 Issue Cards to Persons in Batch
The client provides a convenient way to issue cards to mulple persons in a batch.
St
eps
1. Enter Person module.
2. Click Batch Issue Cards.
All the added persons with no card issued will be displayed in the right panel.
3. Oponal: En
ter key words (name or person ID) in the input box to lter the person(s) that need
issuing cards.
4. Oponal: Click Sengs to set the card issuing parameters. For details, refer to .
5. Click Inialize to inialize the card enrollment
staon or card reader to make it ready for issuing
cards.
6. Click the Card No. column and enter the card number.
-
Place the card on the card enrollment staon.
-
S
wipe the card on the card reader.
-
Manually enter the card number and press the Enter key.
The person(s) in the list will be issued with card(s).
DS-K3G501 Series Tripod Turnsle User Manual
48