User's Manual

Table Of Contents
Steps
1. Enter Person module.
2. Select an organizaon in the organizaon list to add the person and click Add t
o enter Add
Person window.
Note
Enter the person's basic informaon rst. For details, refer to Congure Basic Informaon .
3. Click Add F
ace in the Basic Informaon area.
4. Select Take Photo to enter Take Photo window.
5. Oponal: Enable Verify by Device to check whether the captured face photo can meet the
uploading requirements.
6. Take a photo.
1) Face to the camera and make sure your face is in the middle of the collecng window.
2)
Click
to capture a face photo.
3) Oponal: Click to capture again.
4)
Click OK to save the captured photo.
Figure 6-4 Take a Photo via Client
7. Conrm to add the person.
DS-K3G501 Series Tripod Turnsle User Manual
40