User's Manual

Table Of Contents
2) Enter the required informaon, including the device channel number and alarm input
number.
Note
When the oine device comes online, the soware will connect it automacally.
7. Check S
ynchronize Time to synchronize the device me with the PC running the client aer
adding the device to the client.
8. Oponal: Check Import to Group to create a group by the device name.
9. Finish adding the device.
-
Click Add to add the device and back to the device list page.
-
Click Add and Connue to save the sengs and connue to add other device.
10. Oponal: Perform the following operaon(s).
Remote
Conguraon
Click
on Operaon column to set remote conguraon of the
c
orresponding device.
Note
For detail operaon steps for the remote conguraon, see the
user manual of the de
vice.
Device Status Click on
Operaon column to view device status, including
cameras, recording status, signal status, hardware status, etc.
Edit Device
Informaon
Click
on Operaon column to edit the device informaon, such
as IP addr
ess, user name, and password.
Check Online User Click
on Operaon column to check the online users who access
the de
vice, such as user name, user type, user's IP address, and
login me.
Refresh Click
on Operaon column to get the latest device informaon.
Delete Device Select one or mulple devices and click Dele
te to delete the
selected device(s) from the client.
Import Devices in a Batch
You can add mulple devices to the client in a batch by entering the device parameters in a pre-
dened CSV le.
Steps
1. En
ter the Device Management module.
2. Click Device tab on the top of the right panel.
3. Click Add to open the Add window, and then select Batch Import as the adding mode.
4. Click Export Template and then save the pre-dened template (CSV le) on your PC.
DS-K3G501 Series Tripod Turnsle User Manual
31