User's Manual

Table Of Contents
Appendix B. DIP Switch
B.1 DIP Switch Descripon
The DIP switch is on the master lane control board. No.1 to No 8 is from the low bit to the high bit.
When the switch is towards ON, it means the switch is enabled, otherwise, the switch is o. If you
se
t the DIP switch like the gure displayed below, its binary value is 00001100, and its decimal
value is 12.
B.2 DIP Switch Corresponded Funcons
The 8-bit DIP switch corresponded funcons on the main controller are as follows:
Bit Device Mode Funcon Decimal Value Binary Value
1 to 2 Work Mode Normal Mode 0 00
3 Memory Mode Enable Memory
Mode
0 0
Disable Memory
Mode
1 1
4 Keyfob Paring
Mode
Enable Keyfob
P
aring Mode
1 1
Disable Keyfob
Paring Mode
0 0
5 to 8 Passing Mode Controlled Bi-
direcon
0 0000
Controlled
Entrance and
Prohibit Exit
1 0001
Controlled
En
trance and Free
Exit
2 0010
DS-K3G501 Series Tripod Turnsle User Manual
107