User's Manual

Table Of Contents
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click to enter the remote conguraon page.
3. Click Other → Audio File .
Note
By default, the system contains the audio content. For details about the index related audio
c
ontent, see Table of Audio Index Related Content .
4. Select the inde
x (the playing content) corresponded play scene.
5. Oponal: Input the descripons of the play scene.
6. Click Save Parameters to save the relaonship between the index (the playing content) and the
play scene.
7. Oponal: Click Export to export the default audio le to the local computer.
8. Oponal: Click ... and select audio le from the local computer. Click Import to import the le to
the device.
Note
The imported audio le should be in MEM format.
For details about converng other format of the audio le to MEM format, see the audio
conversion manual.
If you use the third part soware
to create or edit an audio le, the volume of the audio le
should be no less than 0 × 68. If the volume is less than the value, it will exceed the
loudspeaker's power consumpon, so that damage the loudspeaker.
6.12.12 View Relay Status
Click Main
tenance and Management → Device to enter the device list.
Click
to enter the remote conguraon page.
Click St
atus → Relay and you can view the relay status.
DS-K3G501 Series Tripod Turnsle User Manual
104