User's Manual

Table Of Contents
4. Set the people counng parameters.
Clear Coun
ted Number
Click Clear and the counted people number will be restored to zero.
Device People Counng
Click Enable or Disable t
o enable or disable the people counng funcon.
Oine People Counng
Click Enable or Disable to enable or disable funcon of the oine people counng on the
client.
If enabling the funcon and if the device is oine, the device will connue counng the
people and the number will be stored in the device. When the device is online, the client will
read the updated number from the device automacally.
People Counng Type
You can select from Invalid, By Detecon, and By Authencaon Number.
Invalid
The device will not count people. If the device people counng funcon is enabled, the
people counng funcon is sll disabled.
By Detecon
The device will count the people who passing through the device depending on the
detecon result.
B
y Authencaon Number
The device will count the people who authencang on the device.
The failed authencaon will also count as once.
5. Click Sa
ve.
6.12.10 Congure Advanced Network
Click Maintenance and Management → Device to enter the device list.
Click
to enter the remote conguraon page.
Click Ne
twork → Advanced Sengs and you can congure the DNS IP address 1 and the DNS IP
addr
ess.
Click Save to save the sengs.
6.12.11 Congure Audio File
You can relate the audio le to the corresponding playing scene. You can also export the audio le
from the system and import the audio le from the local.
DS-K3G501 Series Tripod Turnsle User Manual
103