User's Manual

Table Of Contents
7. Click Save.
6.12.8
Congure Screen Parameters
The device can connect to a text screen. You can set the display parameters on this page.
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click
to enter the remote conguraon page.
3. Click S
ystem → Screen Conguraon .
4. Set the screen parameters.
Note
For beer performance, it is suggested to use the default parameters.
Screen Posion
Select the screen's posion on the device. If select Exit fr
om the drop-down list, the screen
will be installed at the exit posion of the device.
Screen Model
Select the screen model from the drop-down list.
Font Size
Select the text font size in the screen.
Text Orientaon
Select the text
orientaon on the screen.
Line Spacing
Set the space between two lines.
Word Spacing
Set the space between two words.
Inial Posion
Set the
rst character's posion displayed on the screen.
5. Click Save.
6.12.9 Congure Screen Parameters
You can set the people counng's parameters and aer the
conguraon.
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click
to enter the remote conguraon page.
3. Click S
ystem → People Counng .
DS-K3G501 Series Tripod Turnsle User Manual
102