Quick Start Guide
Table Of Contents
- Legal Information
- Regulatory Information
- Safety Instruction
- Available Models
- Chapter 1 Overview
- Chapter 2 Wiring
- 2.1 Components Introduction
- 2.2 Wiring Electric Supply
- 2.3 Wire Interconnecting Cable
- 2.4 Terminal Description
- 2.4.1 Master Control Board Terminal Description
- 2.4.2 Slave Control Board Terminal Description
- 2.4.3 Main Control Board Terminal Description
- 2.4.4 Main Control Board Serial Port ID Description
- 2.4.5 RS-485 Wiring
- 2.4.6 RS-232 Wiring
- 2.4.7 Wiegand Wiring
- 2.4.8 Barrier Control Wiring
- 2.4.9 Alarm Output Wiring
- 2.4.10 Fire Alarm Module Wiring
- Chapter 3 Installation
- Chapter 4 Device Settings
- Chapter 5 Activation
- Appendix A. Tips for Scanning Fingerprint
- Appendix B. DIP Switch
- Appendix C. Event and Alarm Type
- Appendix D. Table of Audio Index Related Content
- Appendix E. Error Code Description
- Appendix F. Communication Matrix and Device Command
Main Controllingn Board Terminal Descripon
RS-485 Interface GND Grounding
RS-485 B- Connect to Card Reader RS485-
RS-485 B+ Connect to Card Reader RS485+
GND Grounding
RS-485 C- Connect to Card Reader RS485-
RS-485 C+ Connect to Card Reader RS485+
Power Output 2 5 V 5 VDC Power Output
GND 5 VDC Grounding
RS-232 Interface GND Grounding
RS-232 G- Connect to Card Reader RS232-
RS-232 G+ Connect to Card Reader RS232+
GND Grounding
RS-232 H- Connect to Card Reader RS232-
RS-232 H+ Connect to Card Reader RS232+
Power Input +12 V 12 VDC Power Input
GND 12 VDC Grounding
Event Input C1 Event Alarm Input 1
GND Grounding
C2 Event Alarm Input 2
C3 Event Alarm Input 3
GND Grounding
C4 Event Alarm Input 4
Exit Buon B2 Door 2 Signal Input
GND Grounding
B1 Door 1 Signal Input
Door Lock (Relay) D1- Door 1 Relay Output (Dry Contact)
D1+
D2- Door 2 Relay Output (Dry Contact)
D2+
DS-K3B501S Series Swing Barrier Quick Start Guide
10