Quick Start Guide
Table Of Contents
- Legal Information
- Regulatory Information
- Safety Instruction
- Available Models
- Chapter 1 Overview
- Chapter 2 Wiring
- 2.1 Components Introduction
- 2.2 Wiring Electric Supply
- 2.3 Wire Interconnecting Cable
- 2.4 Terminal Description
- 2.4.1 Master Control Board Terminal Description
- 2.4.2 Slave Control Board Terminal Description
- 2.4.3 Main Control Board Terminal Description
- 2.4.4 Main Control Board Serial Port ID Description
- 2.4.5 RS-485 Wiring
- 2.4.6 RS-232 Wiring
- 2.4.7 Wiegand Wiring
- 2.4.8 Barrier Control Wiring
- 2.4.9 Alarm Output Wiring
- 2.4.10 Fire Alarm Module Wiring
- Chapter 3 Installation
- Chapter 4 Device Settings
- Chapter 5 Activation
- Appendix A. Tips for Scanning Fingerprint
- Appendix B. DIP Switch
- Appendix C. Event and Alarm Type
- Appendix D. Table of Audio Index Related Content
- Appendix E. Error Code Description
- Appendix F. Communication Matrix and Device Command
2.4.3 Main Control Board Terminal Descripon
Table 2-1 Main Control Board Terminal Descripon
Main Controllingn Board Terminal Descripon
Power Output 1 +12 V Power Output
GND Grounding
Wiegand Card
R
eader 1
OK Indicator of Card Reader Control Output (Invalid Card
Output)
ERR Indicator of Card Reader Control Output (Valid Card
Output)
BZ Card Reader Buzzer Control Output
W1 Wiegand Head Read Data Input Data1
W0 Wiegand Head Read Data Input Data0
GND Grounding
Wiegand Card
Reader 2
OK Indicator of Card Reader Control Output (Invalid Card
Output)
ERR Indicator of Card Reader Control Output (Valid Card
Output)
BZ Card Reader Buzzer Control Output
W1 Wiegand Head Read Data Input Data1
W0 Wiegand Head Read Data Input Data0
GND Grounding
DS-K3B501S Series Swing Barrier Quick Start Guide
9