User's Manual

Network PT Dome Camera·Quick Start Guide

6. Route the cables through the cable hole and connect the

corresponding cables including power cable, network cable, alarm

cables, and audio cables.

7. Align the notches on the camera with those on the adapter plate,

and rotate the camera clockwise to secure the camera with the

adapter plate.

LOCKOPEN

Connect the Cables Figure 2-4

8. Power on the camera, visit the camera via web browser, and

adjust the surveillance angle via the PTZ interface. You can adjust

the pan angle from -90° to +90°, and adjust the tilt angle from 0° to

75°.