User's Manual

12
7 8 9 11
Add the Camera to Your Hik-Connect Account
1
Install memory card (oponal).
3
Insert the memory card into the card slot on the
side of the camera, as shown below.
Line up and wedge the lower edge of the
camera base with the mounng base and then
push the camera to the mounng base to
secure it.
Rotate the camera body to adjust the panning
posion.
With Hik-Connect service, you can realize some certain
funcons of this product (including, but not limited to,
live view, and remote playback), which depend on the
Internet and telecom value-added services.
2
Install the camera.
Installaon
Operaons
Step 1
Power on the Camera
Connect the camera to the power adapter with the
Micro USB cable, and then plug the power adapter into
the power outlet. When the blue light flashes, the
camera is powered on. You can set the Wi-Fi
connecon.
Micro USB Cable
Power
Outlet
Hik-Connect
Launch the Hik-Connect app and you can get the live
view of the connected devices.
Live View
……
……
- Check the memory card status by tapping on the
Storage Status in the Device Sengs interface.
- If the memory card status displays as Uninialized, tap
to inialize it. The status will then change to Normal.
You can then start recording any event triggered video
in the camera such as moon detecon.
Recording
Launch the Hik-Connect app, tap a connected device and
tap Gallery buon to play back.
Playback
Launch the Hik-Connect app and tap Message to see the
alarm messages.
Alarm Noficaon
Paste the mounng template onto the
installaon surface.
1
Fix the mounng base to the installaon
posion according to the holes on the
mounng template.
2
3
1
Pull and push the camera body to adjust it to the
desired lng posion.
2
Adjust the surveillance angle.
1
2
70°
25°
Hik-Connect Setup
- Connect your mobile device to Wi-Fi.
- Download and install the Hik-Connect app by searching the
“Hik-Connect” in App Store or Google Play
TM
.
- Launch the app and register for a Hik-Connect user
account.
OR
Step 3
- Connect your mobile phone to a Wi-Fi (5G Wi-Fi is not
supported yet).
- Log into the Hik-Connect app.
- In the Home page, tap “+” on the upper-right corner to
add a camera.
- Scan the QR code on the boom of the camera or on the
Quick Start Guide cover.
- Tap Connect to a Network buon in the pop-up interface.
- Choose Wireless Connecon to set the Wi-Fi connecon.
- Input the Wi-Fi password that your mobile phone has
connected to, and tap Next to start the Wi-Fi connecon.
(Locate the camera within 3 meters from the router.)
- Tap Add buon in the next interface to finish adding.
13
Step 2
360°
10
0504151080124
Use of the product is subject to your registraon with
Hik-Connect and your agreement to the Terms of
Service found at
Start the adding process only when the indicator flashes
blue.