W100 Series Mobile NAS User Manual Download App UD04537B
User Manaul COPYRIGHT ©2017 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
A Features Compared with traditional NAS, W100 series mobile NAS (hereinafter referred to as W100) provides following features: • USB Type-C (hereinafter referred to as USB-C) 3.1 interface with a high transmission speed. • Up to 10 users can access W100 simultaneously. Users can share files. • Wi-Fi Direct feature. While accessing W100 via its Wi-Fi, you can visit Internet using data cellular. • Shock-proof feature for the internal SSD (Solid State Drive).
C Interfaces and Indicators USB-C Interface Power Indicator Wi-Fi Indicator QR Code Reset Button SD Card Slot USB Interface Power Switch 1 USB-C Interface • Attach it to computer USB interface via USB-C cord to charge W100 or transmit data. • Attach it to other device via OTG cable to transmit data. 2 USB Interface • Attach it to other USB device to transmit data. • Charge up your smartphone. 3 SD Card Slot Slot for SD card.
4 Power Switch • Hold it for 3 seconds to turn on/off W100. -- Wi-Fi indicator on: W100 starts up. -- Wi-Fi indicator and power indicator off: W100 is shut down. • Press it to check W100 remaining battery. For details, refer to the following Power Indicator description. 5 Power Indicator • Its color shows the remaining battery. -- Green: battery is full. -- Cyan: 75% battery remaining. -- Yellow: 50% battery remaining. -- Red: 25% battery is remaining. You need to charge the W100.
D App Connection After connecting W100 Wi-Fi in your smartphone, you can configure W100 in HiStor app. Step 1 Download and install the HiStor app first. • Option 1: Scan the QR code in the manual cover. • Option 2: Search HiStor in application store. Step 2 To build connection between W100 and HiStor, connect W100 Wi-Fi in your smartphone. * Android Smartphone User (1) Scan W100 QR code pasted in its bottom via HiStor scanning function. (2) Follow the wizard to connect the Wi-Fi.
Figure 1 Prompt Figure 2 Home Page 5
E App Operation You can configure W100 in configuration interface. Step To enter W100 Configuration interface, click in home page and select the W100 Device item.
Sharing W100 Sharing feature is designed for W100 quick adding. Other users can add W100 by scanning the shared QR code. One W100 can be added by up to 10 users. Step 1 Enter Share Device interface. W100 Configuration interface → Share Device Step 2 Enable Share Device item to generate a QR code. The QR code is unique for each W100. Figure 4 Share Device Step 3 Add W100 in target smartphones by scanning the QR code via HiStor and follow the wizard to connect W100.
Storing Files HiStor enables W100, smartphone, USB device, and SD card to exchange files, including pictures, videos, music, and documents. We take the example of copying files from smartphone to W100 to describe the steps. 2 1 4 3 a 5 a b You can play music and video and rename files here.
Auto Import When Auto Import feature is on, once a storage media is attached to W100, HiStor will automatically import data from the storage media into W100. Step 1 Enter W100 configuration interface. Step 2 Turn on Auto Import. Step 3 Select Import from SD or Import from USB Flash Disk according to your needs.
F W100 Configuration Connecting WLAN If W100 operation mode is Routing and W100 is connecting with a WLAN, smartphones and devices attached to W100 can access Internet via W100. Step 1 Enter W100 Operating Mode configuration interface. W100 Configuration interface → Operating Mode Step 2 Select Operating Mode as Routing Mode. • Routing Mode: W100 WLAN name is ROUTE-XXX. • P2P Mode: Wi-Fi Direct feature is on. W100 WLAN name is DIRECT-XXX.
Formatting W100 Data in W100 will be erased after format. Step 1 Enter Format Device interface. Internal and external storage media will be listed. W100 Configuration interface → Format Device Step 2 Select a storage media to format and confirm the operation. Some models do not support the format feature.
Upgrading W100 You can upgrade W100. Before you start, ensure the W100 remains at least 50% battery. * Auto Upgrade Step 1 Access W100 to Internet. For detailed steps, refer to Step 4 and Step 5 of “Connecting WLAN”. Step 2 W100 will automatically download the latest upgrade package. Step 3 Follow wizard to upgrade W100. * Manual Upgrade Step 1 Copy the upgrade package to the root directory of W100 or USB device or SD card attached to W100.
G Preventive and Cautionary Tips For W100 Main Body • In the use of the product, you must be in strict compliance with the local regulations. • Properly keep the user manual for operation reference. • Purchase SD card from formal channels. SD card with Class 10 speed or above is recommended. • Working environment: 0 ̊C to 35 ̊C (32 ̊F to 95 ̊F). Do not expose the product to environment with high or low temperature, high humidity, or high-dust density. • Keep all liquids away from the product.
H Troubleshooting Troubles S m a r t p h o n e fa i l e d to access Internet via W100. Smartphone accesses Internet via data cellular instead of W100. Reasons/Resolutions • Ensure W100 operating mode is Routing. • Ensure W100 has connected to Internet. When W100 operating mode is P2P, the connected smartphone accesses Internet via data cellular. • Ensure at least 50% battery remaining in W100. • During auto upgrade, ensure W100 Internet Unable to update W100. connection is well.
