Users Manual

Cet équipement doit être installé et utilisé à une distance minimale de 20 cm
entre le radiateur et votre corps.
(i) the device for operation in the band 5150-5250 MHz is only for indoor use
to reduce the potential for harmful interference to co-channel mobile satellite
systems;
(ii) the maximum antenna gain permitted for devices in the bands 5470-5725
MHz shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725-5825
MHz shall comply with the e.i.r.p. limits specied for point-to-point and non
point-to-point operation as appropriate.
(i)Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés
uniquement pour une utilisation à l'intérieur an de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux.
(ii) le gain d'antenne maximal autorisé pour les appareils dans les bandes
5470-5725 MHz doivent respecter le pire limiter; et
(iii) le gain d'antenne maximal autorisé pour les appareils dans la bande 5725-
5825 MHz doivent respecter le pire limites spéciées pour le point-à-point et
l'exploitation non point à point, le cas échéant.
The power supply must conform
to LPS. The recommended adaptor
models and manufacturers are
shown on the right. Use the attached
adapter, and do not change the
adaptor randomly.
Model Manufacturer
MKAC-57-242500M,
MKAC-57-242200M,
MKAC-57-241500M
MACABLE
Safety Instruction
CAUTIONS: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. BATTERY IS NOT USER
REPLACEABLE.
Please read the manual before using the device.
Key Safety Tips for Transformer:
• Inspect your transformer thoroughly to prevent or minimize breakdowns. Before installation,
monitor your transformer by checking for any burnt odor, damaged power cord or
connectors, or any parts that are improperly installed.
• Keep the power off when working on the transformer. Make sure there is zero electrical
leakage or continuity between the current source and the system.
• Learn the maximum voltage requirements of your transformer. Be careful of system
overload from a single transformer, with the understanding that multiple transformers help
balance the impedance of each load.
• Keep spare nuts, bolts, and other objects away from your work, so that they don’t touch or
fall into the transformer.
• Be certain that your transformer is grounded, which will prevent static electricity and protect
the coils from contacting the enclosure or core.
• Always keep your transformer and all of its components dry and free from any kind of
moisture or water. To protect unskilled onlookers, set up caution signs that warn people to
keep away from danger.
Due to the product shape and dimensions, the name and address of the importer/
manufacturer are printed on the package.
Customer Service: For more information, please visit https://us.hikvision.com/en.
Need help? Please visit “https://us.hikvision.com/en” for our local contact details.