Quick Start Guide
Table Of Contents
- 1 Overview
- 2 Installation
- 2.1 Installing the Memory Card
- 2.2 Installing DE1Axxx(I) Series PTZ Camera
- 2.3 Installing DE2Axxx(I) Series PTZ Camera
- 2.4 Installing DE2xxx(I) Series PTZ Camera
- 2.5 Installing DE3xxx Series PTZ Camera
- 2.6 Installing DY3xxx Series PTZ Bullet Camera
- 2.7 Installing DE4AxxxI Series PTZ Camera
- 2.8 Installing DE3AxxxI Series PTZ Camera
- 2.9 Installation of Network Cable Water-proof Jacket
- 2.10 Installation of Water-proof Tape
- 3 Setting the PTZ Camera over the LAN
- 4 Accessing via Web Browser
- 5 Operating via Hik-Connect App
Network PTZ CameraยทQuick Start Guide
53
5. Wrap the water-proof tape around the remaining unused cables
tightly as the figure below.
Figure 2-75 Wrap the Unused Cables
Note:
Make sure that all naked wires are all firmly wrapped in the
water-proof tape.
6. Press the tape to make sure no water can get in as the figure
below.
Press
Press
Press
Press
Figure 2-76 Press the Water-proof Tape