Quick Start Guide

Network PTZ Camera·Quick Start Guide
45
 For wooden wall, you can just use the self-tapping screw to fix
the bracket.
 Make sure that the wall is strong enough to withstand more
than eight times the weight of the PTZ camera and its cable
Steps:
1. Pull the bracket out from the side of the camera, and unclench the
decorative cover as shown in Figure 2-65.
Decorative cover
Bracket
Figure 2-65 Open the Decorative cover and pull out bracket
2. The cables
can be routed either through the wall or on the wall
surface.
 For the cables routed through the wall, it is required to drill a
cable hole on the wall, aligning it with the hole on the bracket,