Quick Start Guide

Network PTZ Camera·Quick Start Guide
39
3. Fix the camera on the wall by knocking the expansion screws into
the wall through the bracket, as shown in Figure 2-54.
Figure 2-57 Install the Wall-mounted PTZ Bullet Camera
Notes:
 To install the PTZ bullet camera with the pole, you can use
hexagon socket screws instead of the expansion screws.
 Water-proof treatment is required for cable connectors. Refer
to section 2.9 and 2.10 for details.
2.6.3 Base Mounting
Before you start:
Base-mounted PTZ bullet camera can be installed on hard plane
structures such as cement surface.
Note:
Make sure that the plane structure is strong enough to withstand
more than eight times the weight of the PTZ camera and its
accessories.
Steps: