Quick Start Guide

Network PTZ Camera·Quick Start Guide
38
2.6.2 Wall Mounting
Before you start:
The wall-mounted PTZ bullet camera can be installed on cement wall
and pole mounting. The installing environment shall meet the
following conditions:
 For cement wall, you need to use the expansion screw to fix the
bracket. The mounting hole of the expansion pipe on the wall
should align with the mounting hole on the bracket.
 For wooden wall, you can just use the self-tapping screw to fix
the bracket.
 Make sure that the wall is strong enough to withstand more
than eight times the weight of the PTZ camera and its
accessories.
Steps:
1. Drill screw holes on the wall according to the dimensions of
wall-mounted camera and insert four M6 expansion screws into
the screw holes, as shown in Figure 2-53.
Figure 2-56 Drill Screw Holes
2. Route the cables through the camera bracket and cover the four
hex nuts with flat washers.