Quick Start Guide

Network PTZ Camera·Quick Start Guide
33
clockwise into the base plate, and the PTZ camera is secured with
the base plate by three locks on the plate.
Note:
Water-proof treatment is required for cable connectors. Refer to
section 2.9 and 2.10 for details.
6. Fix the screws on the side with a screwdriver, as shown in Figure
2-46.
①
OPEN LOCK
②
③
Figure 2-49 Fix the Camera
7. Secure the PTZ camera and remove the protective film.
2.5.2 In-ceiling Mounting
Notes:
 Reserve at least 250 mm of height for in-ceiling mounting.
 The thickness of the ceiling shall range from 5 mm to 40 mm.
 Make sure the ceiling is strong enough to withstand more than
four times the weight of the PTZ camera and its accessories.
Steps: