Quick Start Guide

Network PTZ Camera·Quick Start Guide
24
For the cables routed from the top of the back box, it is required to
drill a cable hole in the ceiling.
Figure 2-34 Cabling for DE2xxx Series PTZ Camera
Figure 2-35 Cabling for DE2xxxI Series (IR) PTZ Camera
Note:
Water-proof treatment is required for cable connectors. Refer to
section 2.9 and 2.10 for details.
Ceiling Mounting without Junction Box
Steps:
1. Rotate the base plate counterclockwise to separate it from the PTZ
camera, as shown in Figure 2-23 and Figure 2-24.
2. Attach the drill template (supplied) to the place where you want
to fix the PTZ camera, and make sure the front arrow appoints to
the monitoring area.