Quick Start Guide

Network PTZ Camera·Quick Start Guide
22
LOCK
OP EN
Figure 2-31 Secure DE2xxxI Series (IR) PTZ Camera
5. Secure the mounting base to the wall with four PA4×25 screws
(supplied).
Figure 2-32 Install the Mounting Base
6. Install the PTZ camera to the bracket.
1). Route the cables of the PTZ camera through the wall bracket.
2). Connect the corresponding cables.
3). Hang the bracket together with the PTZ camera on the
mounting base.
4). Fix the mounting base with a PM4
×10 screw.