User's Manual

AX PRO User Manual

Note

The password is allowed to be 4 to 6 digits. No number is disallowed.

After you add one keypad, you can add PIN code (Keypad Password)

in the user menu. When you click in the input box, there will be

indication shows that 4 to 6 numbers allowed.

Edit Duress Password

If the target user is an administrator, you can tap the target user on

the user list and then tap Edit Duress Password to set the duress

password to the target user.

Note

If under duress, you can enter the duress code on the keyboard to

arm and disarm area(s) and upload a duress alarm.

Note

● Configuration items and user permission will vary according to the user type.

● You can view linked Tags/tags and keyfobs of the user but you do not have permission to

configure them.

Bypass Zone

When the area is armed, you can bypass a particular zone as you desired.

Before You Start

Link a detector to the zone.

Steps

1. On the device list page, tap the AX PRO and then log in to the device (if required) to enter the

Area page.

2. Tap Device.

3. Tap a zone in the Device tab.

4. Tap to enter the Setting page.

5. Enable Zone Bypass and the zone will be in the bypass status.

The detector in the zone does not detect anything and you will not receive any alarm from the

zone.