User's Manual

AX PRO User Manual
28
The zone activates all the time with sound/sounder output when alarm occurs. It is usually
used in areas equipped with gas detectors (e.g., the kitchen).
Medical Zone
The zone activates all the time with beep confirmation when alarm occurs. It is usually used
in places equipped with medical emergency buttons.
Timeout Zone
The zone activates all the time. The zone type is used to monitor and report the "ACTIVE"
status of a zone, but it will only report and alarm this status after the programmed time has
expired. (1 to 599) Seconds. It can be used in places equipped with magnetic contacts that
require access but for only a short period (e.g., fire hydrant box's door or another external
security box door)
Key Zone
The linked area will arm after being triggered, and disarm after being restored. In the case of
the tampering alarm, the arming and disarming operation will not be triggered.
Disabled Zone
Alarms will not be activated when the zone is triggered or tampered. It is usually used to
disable faulty detectors.
6. Enable Stay Arming Bypass, Chime, Dual-Alarm or Silent Alarm according to your actual needs.
Note
● Some zones do not support the function. Refer to the actual zone to set the function.
● Different zone types have different parameters.
7. Set heartbeat cycle.
8. Optional: Tap Delete to delete the device.
Keypad
You can set the parameters of the keypad that is enrolled to the AX PRO.
Steps
1. In the site, tap the AX PRO and then log in to the device (if required).
2. Tap a keypad in the Device tab.
3. Tap .
4. Tap Edit Icon the keypad name.
5. Enable Enable Keyfob.
6. Select linked users.
7. Tap Function Key Settings to set functions for single keys and combination keys.
8. Optional: Tap Delete to delete the device.
Sounder
The sounder is enrolled to the AX PRO via the wireless receiver module, and the 868 Mhz wireless