User's Manual

AX PRO User Manual
25
alarm is triggered or restored.
Note
You need to set event filtering interval time.
Panel Management Notification
The device will push notifications when the user operate the AX PRO.
Wireless Device Tampering Alarm Notification
The device will push notifications when tampering alarm of any wireless device is triggered or
restored.
AX PRO Tampering Alarm Notification
The device will push notifications when tampering alarm of the control is triggered or
restored.
Panic Alarm Notification
The device will push notifications when panic alarm is triggered or restored by zones, keypads
or keyfobs.
Medical Alarm Notification
The device will push notifications when medical alarm is triggered.
Gas Alarm Notification
The device will push notifications when gas alarm is triggered.
Fire Alarm Notification
The device will push notifications when fire alarm is triggered or a user presses the fire alarm
key on the keypad.
AX PRO System Status Notification
The device will push notifications when the AX PRO system status is changed.
Wireless Detector Status Notification
The device will push notifications when any wireless detector status is changed.
Device Status Notification
The device will push notifications when any device status is changed.
Alarm Center
You can set the alarm center's parameters and all alarms will be sent to the configured alarm
center.
Steps
1. In the site, tap the AX PRO and then log in to the device (if required).
2. Tap → Communication → Alarm Center to enter the page.
3. Select an alarm center and enable it.