User's Manual

AX PRO User Manual

Late to Disarm Time

Set the time point mentioned in Late to Disarm.

Weekend Exception

If enabled, Auto Arm, Auto Disarm, and Late to Disarm are disabled on the weekend.

Excepted Holiday

Enable the function and the zone will not be armed/disarmed in the holiday. You should set the

holiday schedule after enabling.

Note

Up to 6 holiday groups can be set.

Communication

Mobile Network

Enter a short description of your task here (optional).

Steps

1. In the site, tap the AX PRO and then log in to the device (if required).

2. Tap → Communication → Mobile Network to enter the page.

3. Enable Mobile Network.

4. Tap Parameter Configuration → Edit Icon and set parameters including the user name, APN,

MTU and PIN conde.

5. Tap Save Icon.

6. Enable Data Usage Limit.

7. Edit Data Used This Month and Data Limited per Month.

Message Push-Alarm Center

When an alarm is triggered, if you want to send the alarm notification to the mobile phone, you

can set the notification push parameters.

Steps

1. In the site, tap the AX PRO and then log in to the device (if required).

2. Tap → Communication → Message Push-Alarm Center to enter the page.

3. Tap Add Phone Number and enter the phone number.

4. Enable Phone Call and SMS according to your need.

5. Set Number of Calling.

6. Check notifications.

Zone Alarm & Tampering Alarm Notification

The device will push notifications when the zone alarm is triggered or the zone tampering