User's Manual

AX PRO User Manual
21
After locking, users can not operate the device and receive messages.
Communication failure packet loss times
If the option is enabled, the system will detect interactive heartbeat between peripherals and
the AX PRO. If no peripherals heartbeat is detected, the device will become offline.
Fault Check
In the site, tap the AX PRO. Tap → System → System Options → Fault Check to enter the page.
Detect Network Camera Disconnection
If the option is enabled, when the linked network camera is disconnected, an alarm will be
triggered.
Panel Battery Fault Check
If the option is enabled, when battery is disconnected or out of charge, the device will not
upload events.
Wired Network Fault Check
If the option is enabled, when the wired network is disconnected or with other faults, the alarm
will be triggered.
Wi-Fi Fault Check
If the option is enabled, when the Wi-Fi is disconnected or with other faults, the alarm will be
triggered.
Cellular Network Fault Check
If the option is enabled, when the cellular data network is disconnected or with other faults, the
alarm will be triggered.
AC Power Down Check Time
The system checks the fault after the configured time duration after AC power down.
To compliant the EN 50131-3, the check time duration should be 10 s.
System Instructions
In the site, tap the AX PRO and then log in to the device (if required). Tap → System →
System Options → System Instructions to enter the page.
Stop Arming
If the option is enabled, when there is a fault during the arming procedure., you can stop arming
manually.
Fault Check
The system will check if the device has the faults in the checklist during the arming procedure.
Arming with Fault
Check the faults in the Fault Check list, and the device will not stop the arming procedure when
faults occurred.