Quick Start Guide

Table Of Contents

Radar PTZ Camera·Quick Start Guide

Note:

Make sure that all naked wires are all firmly wrapped in the water-proof tape.

4. Press the tape on both ends of the connector to make sure no water can get in as the

figure below.

Press

Figure 2-15 Press the Water-proof Tape

5. Wrap the water-proof tape around the remaining unused cables tightly as the figure

below.

Figure 2-16 Wrap the Unused Cables

Note:

Make sure that all naked wires are all firmly wrapped in the water-proof tape.

6. Press the tape to make sure no water can get in as the figure below.

Press

Figure 2-17 Press the Water-proof Tape