Quick Start Guide

Radar PTZ Camera·Quick Start Guide
9
Note:
Water-proof treatment is required for cable connectors. Refer to Section 2.3 and
2.4 for details.
Lock Screws
Figure 2-11 Finish the Installation
2.3 Installation of Network Cable Waterproof Jacket
Purpose:
If the camera is installed outdoor, you should use the waterproof accessory or tapes to
waterproof the cables. Otherwise the cables might get wet or a short circuit occurs.
⑥
④
②
③
①
④
⑤
⑥
③
①
Align
Figure 2-12 Install Waterproof Jacket
Steps:
1. Feed the network cable through ① and ③ in order.
2. Fix ② on the network cable between ① and ③.